Targi

Aluprof’s roller
shutter systems

certified by the Passive
House Institute, Darmstadt

Banner Image 1

Ribbon skylights

Aluprof’s dedicated solutions

Facility: Galeria Katowice

Pollard Street, Manchester 2012

Economic energy systems

a new standard in the construction industry

Certyfikat Breem Excellent: Pollard Street, Manchester 2012

Sky Tower

Aluprof

highest in Poland

Facility: Sky Tower, Wroclaw 2012

Banner Image 1

Safe

and warm home

Private building

Banner Image 1

We create the space

and make the form

Facility: Centrum Nanotechnologii Uniwersytetu Rzeszowskiego

 


Downloads

MB-SR50N HI

Mullion-transom wall


The structure presented here is a version of  MB-SR50N featuring enhanced thermal insulation performance. 

The system is designed for the construction and execution of flat, light-weight curtain walls of the suspended or filling type, roofs, skylights and other structures. The shapes of profiles  enable selection of mullion and transom profiles which flush with each other on the inside surface of the façade.

The MB-SR50N HI system features basic characteristics and possibilities inherent in the base construction MB-SR50N. The thermal insulation zone deserves a particular mention, though. Here, special two-component insulators have been applied. They are based on a HPVC insulator (or a set of insulators of appropriate width), identical to the one used in the standard MB-SR50 system, which makes it possible to drive screws with high accuracy during the installation process  at the building site. On both lateral surfaces of the insulator additional elements made of flexible material are attached  (glued on), which enhance thermal insulation performance  and limit the air flow in the space separating the infills of the façade. The insulator built in this way enables maintaining  convenience and accuracy of mounting of a traditional façade, ensuring at the same time that very good thermal insulation parameters are attained – the heat transfer coefficient, depending on the applied profiles and accessories  spans between 0.94 to 1.94 W/m2K. Likewise in the base version of the façade, the structure allows for installation of different types of infills,  including  glazing of large dimensions and two-chamber insulating glazing units. With regard to active elements, the MB-70HI doors and windows featuring enhanced thermal insulation performance are particularly recommended  for façades of the HI series.

The MB-SR50N HI system was subjected  to thorough testing  performed by the Building Research and Testing Institute IFT Rosenheim and attained very high technical parameters.

  • Air infiltration: class AE 1200, EN 12152
  • Rainwater tightness: class RE1500, EN 12154
  • Resistance to wind load: 2.4 kN/m2, EN 13116:2002
  • Impact resistance: class I5/E5,  PN-EN 14019


As regards the declaration of conformity for vertical façades based on the MB-SR50N HI system, a harmonized European Standard PN-EN 13830  “Curtain Walling. Product Standard” has been applied as a reference document.


Aluprof S.A.
ul. Warszawska 153
43-300 Bielsko-Biała
phone: +48 (33) 819 53 00
e-mail: aluprof@aluprof.eu
The Opole plant
ul. Gosławicka 3
45-446 Opole 
phone: +48 (77) 400 00 00
e-mail: aluprof@aluprof.eu
The Goleszów plant
ul. Przemysłowa 10
43-440 Goleszów
phone: +48 (33) 483 20 10
e-mail: aluprof@aluprof.eu
 
KRS: 0000106225 | NIP: 547-02-42-884 | Initial/paid-in capital: 4 028 350 PLN,-
District Court in Bielsko-Biała, the VIII Commercial Department of the National Court Register
Realization: Lizard Media
EU GRANTS

DOTACJE NA INNOWACJE – INWESTUJEMY W WASZĄ PRZYSZŁOŚĆ

Projekt współfinansowany ze środków Europejskiego Funduszu Rozwoju Regionalnego w ramach Programu Operacyjnego Innowacyjna Gospodarka 2007 - 2013.